DOLABRO C3520 – 20V MAX Cordless Hammer Drill, PRO KIT
269,00 €
Price includes 22% VAT. Delivery to Slovenia only.
Hammer drill for drilling, hammer drilling, and fastening with 150 Nm of torque. For installation, fit-out, and daily site work. Kit includes 2 × 4.0 Ah batteries, fast charger, and BMC carry case.
Description
The C3520 is the core tool in the van: it drills into wood, metal, and brick, and drives screws and bolts.
150 Nm is enough for large wood bits, long screws, and small hole saws.
Two gears and Turbo:
Gear 1 for fastening and large diameters, gear 2 for fast drilling. Turbo adds 25% speed when you need it.20 clutch settings:
Screws stay flush, heads stay intact.Anti-kickback (kickback control):
If the bit binds suddenly, the electronics stop the motor and reduce the jolt to your wrist.Electronic brake:
The chuck stops as soon as you release the trigger.Auxiliary handle:
For stable control at large diameters.For reinforced concrete and chiseling, choose the DC2003 rotary hammer.
Specifications
| Voltage | 20 V MAX |
| Motor | Brushless |
| Max. torque | 150 Nm |
| No-load speed – Normal | 0–400 / 0–1,600 rpm |
| No-load speed – Turbo | 0–500 / 0–2,000 rpm |
| Clutch settings | 20 + drill |
| Chuck | Keyless, 13 mm |
| Drilling in steel | up to 13 mm |
| Modes | Drilling · hammer drilling · fastening |
| Safety functions | Anti-kickback · electronic brake · overload, overheat and deep-discharge protection |
| Noise LpA / LWA | 80.8 / 88.8 dB(A), K = 5 dB |
| Vibration | Hammer drilling into concrete 11.1 m/s² · drilling into metal 1.2 m/s² · K = 1.5 m/s² |
In the Kit
- C3520 hammer drill
- 2 × 20V MAX 4.0 Ah battery
- fast charger
- BMC carry case
- auxiliary handle
- 65 mm screwdriver bit
- belt clip with screw
- operating manual
